Product overview
MTL5523 Solenoid driver with LFD original product made in England
MTL5523 Solenoid driver with LFD original product made in England
MTL5523 product specification as below
MTL5523 Solenoid driver with LFD original product made in England
MTL4523/R –
MTL5523 SOLENOID/ALARM DRIVER with line fault detection, IIC
With the
MTLx523 interface, an on/off device in a hazardous area can be controlled by a
volt-free contact or logic signal in the safe area. It is suitable for driving
loads such as solenoids. Line fault detection (LFD), which operates
irrespective of the output state, is signalled by a safearea solid-state switch
which de-energises MTLx523, or energises MTL4523R, if a field line is open or
short–circuited. Earth fault detection can be provided by connecting an MTL4220
earth leakage detector to terminal 3.
SPECIFICATION
MTL5523 Solenoid driver with LFD original product made in England
See also common
specification
Number of
channels
One
Location of
load
Zone 0, IIC,
T4–6 hazardous area if suitably certified
Div. 1, Group
A, hazardous location
Hazardous-area
output
Minimum output
voltage: 13.6V at 48mA
Maximum output
voltage: 24V from 180Ω
Maximum
off-state output voltage: 4V from 180Ω
Current limit:
48mA minimum
Output ripple
< 0.5% of
maximum output, peak to peak
Control input
Suitable for
switch contacts, an open collector transistor or logic drive.
(Internal
contact wetting voltage 12V @ 0.2mA contact closed.
Not suitable
for voltage control via series diode.)
Output turns on
if input switch closed, transistor on or
< 1.4V
applied across control input
Output turns
off if input switch open, transistor off or
> 4.5V
applied across control input
Response time
Output within
10% of final value within 100ms
Line fault
detection (LFD)
Open or short
circuit in field cabling de-energises* solid state
line-fault
signal.
LFD transistor
is switched on*, provided that the field circuit
impedance is
> 55Ω and < 4kΩ.
* These
conditions are reversed for the MTL4523R. This is to permit parallel
connection of
alarms between modules to provide a group alarm output.
Line fault
signal characteristics
Maximum
off-state voltage: 35V
Maximum
off-state leakage current: 10µA
Maximum
on-state voltage drop: 2V
Maximum
on-state current: 50mA
LED indicators
Green: power
indication
Yellow: output
status, on when output active
Red: LFD
indication, on when line fault detected
Maximum current
consumption
100mA at 24V dc
Power
dissipation within unit
1.2W with
typical solenoid valve, output on
2.0W worst case
Safety
description
Uo=25V Io=147mA
Po= 0.92W Um = 253V rms or dc
Other related models for MTL5500 range as below for your reference.
MTL5523 Solenoid driver with LFD original product made in England
MTL5018AC
MTL5501-SR
MTL5510
MTL5510B
MTL5511
MTL5513
MTL5514
MTL5514D
MTL5516C
MTL5517
MTL5521
MTL5522
MTL5523
MTL5523V – V
MTL5524
MTL5525
MTL5526
MTL5541
MTL5541A
MTL5541AS
MTL5541S
MTL5544
MTL5544A
MTL5544AS
MTL5544D
MTL5544S
MTL5546
MTL5546Y
MTL5549
MTL5549Y
MTL5573
MTL5575
MTL5576-RTD
MTL5576-THC
MTL5581
MTL5582
MTL5582B
MTL5991
MTL5531
MTL5532
MTL5533
MTL5561
MPA5500
MTL5051
MTL5053
MTL5314
MTL5599
MTL5523 Solenoid driver with LFD original product made in England
If you have any other question about MTL5523, please feel free to contact me here!
Contact details
HONGKONG XIEYUAN TECH CO., LIMITED
Telephone:86-
Mobile :86-(Whatapp&Wechat
is available)
Skype:xyautomation
E-mail:sales1@hkxytech.com
Leave a message for product
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报