iTEMP TMT122 DIN rail temperature transmitter
iTEMP TMT122 DIN rail temperature transmitter
Transformation of sensor signals into stable and standardized output signals for all industries Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from resistance thermometers (RTD) and thermocouples (TC), it also transfers resistance and voltage signals using HART communication. Swift and easy operation, visualization and maintenance by PC using operating software. Installation is realized on DIN rail according to IEC 60715 (housing width: 22.5 mm).
iTEMP TMT122 DIN rail temperature transmitter
Benefits:
Universal settings with HART protocol
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit, NAMUR NE 43 compliant
EMC to NAMUR NE 21, CE
Ex-Certification: ATEX Ex, CSA IS, FM IS
Galvanic isolation
Field of application:
Temperature transmitter with HART -Protocol for converting various input signals into a scalable 4 to 20 mA analog output signal
Input: Resistance thermometer (RTD), thermocouple (TC), resistance transmitter (Ω), voltage transmitter (mV)
HART-Protocol...
Features and specifications:
Measuring principle
Rail transmitter
Input
1 x RTD, TC, Ohm, mV
Output
1 x analog 4...20 mA
Auxiliary power supply
12...35 V DC (standard-version)
12...30 V DC (Ex-version)
Communication
HART-protocol
iTEMP TMT122 DIN rail temperature transmitter
Other similar products:
TMT122-ABAAB
TMT122-BBAAB
TMT122-CBAAB
TMT122-CBAAA
TMT122-CBAAY
TMT122-DBAAA
TMT122-DBAAB
TMT122-DBAAY
TMT122-EBAAA
TMT122-EBAAB
TMT122-EBAAY
iTEMP TMT122 DIN rail temperature transmitter