Yokogawa Direct Panel-Mount Type INCITOR
The SIHN (Direct Panel Mounting) Indicator takes little panel space, yet is easy to read. It accepts either 1 to 5 V or 4 to 20 mA DC inputs.
Yokogawa Direct Panel-Mount Type INCITOR
STANDARD SPECIFICATIONS
Input Signal
Analog Input: 1 to 5 V or 4 to 20 mA DC (one input).
Input Resistance: 2 kΩ (for 1 to 5 V DC input). Up to
25 Ω (for 4 to 20 mA DC input).
Yokogawa Direct Panel-Mount Type INCITOR
Indicator
Indicator Type: Single-pointer moving coil meter.
Pointer Color: Red.
Indication Range: 0 to 100%.
Indicator Accuracy: 1% of span.
Scale Length: 100 mm.
Scale Marking: Major divisions are marked. Scale is
interchangeable.
Normal Operating Conditions
Ambient Temperature: 0 to 50°C.
Ambient Humidity: 5 to 90% relative humidity (noncondensing).
Insulation Resistance:
Between Input Terminals and Case (ground): 100
MΩ/500 V DC.
Dielectric Strength:
Between Input Terminals and Case: 500 V AC for 1
minute.
Wiring:
Signal Wiring from the Field: ISO M4 size (4mm)
screws on terminal block.
Mounting: These instruments mount directly in a
panel. Instrument may be inclined with front up
to 75° from vertical (rear of instrument lower than
front). (Indicator zero may need readjustment).
Nameplate:
Size: 12.6 × 33.8 mm, cream semi-gloss finish.
Lettering: In black, one or two rows each up to nine
alphanumeric characters long.
Front Panel Finish: Dark Green (Munsell 2.5GY 3/1).
Dimensions: 150 (H) × 37.5 (W) × 179 ((D): depth
behind panel) (mm).
Yokogawa Direct Panel-Mount Type INCITOR
Yokogawa Direct Panel-Mount Type INCITOR