Tips for compressor maintenance of high and low temperature damp heat test chamber
1、 The compressor should be placed stably. The slight shaking during the operation of the compressor will cause the refrigerant oil to not flow to the compressor completely, and part of the oil will flow into the return pipe of the compressor, thus affecting the service life of the compressor. Therefore, during daily maintenance, check whether the compressor oscillates and whether the anchor screws are loose and fall off.
II. The voltage at the compressor workplace must be stable. If the voltage is unstable, the current supplied to the compressor will be too large or too small. The compressor is often operated in such an environment, which is prone to great damage and greatly shortens its service life. Therefore, in most cases, voltage regulators should be used to maintain voltage stability.
III. The working environment of the compressor should be well ventilated, and the ambient temperature should not be higher than 28 degrees, so that the compressor can dissipate heat faster. It is often necessary to regularly clean the dust on the compressor condenser during operation, because too much dust accumulation will lead to abnormal refrigeration of the equipment; If it is not used for a long time, try to place the equipment in a dust-free space.
IV. during the operation of the equipment, the frequency of starting the compressor should not be too frequent, and the interval between two starts should be more than 15 minutes.
V. the smooth oil used by the compressor should be precipitated and filtered first. Therefore, compressor oil should be used differently in winter and summer, and should not be confused.