Zhejiang FUXIA Medical Technology Co.,Ltd.
Main camp product：Laminar flow cabinetair samplerpass box and weighing boothAir showerClass 100 clean cabinetClass II biological safety cabinetFume hoodClean sampling vehicle
Product Search
Contact Us
Browse by Category
News

Common faults and solutions of air shower


Common faults and solutions of air shower room:
 
1. Low wind speed
 
Failure reasons: 1. The phase sequence of the three-phase power supply is incorrect; 2. The high-efficiency filter has been used for too long, causing high-efficiency blockage; 3. The primary-effect filter has been used for too long, causing initial-efficiency blockage.
 
Treatment methods: 1. Readjust the phase sequence of the three-phase power supply; 2. Replace the high-efficiency filter; 3. Replace the primary filter.
 
Second, the fan does not turn
 
Failure reasons: 1. The incoming air switch is tripped; 2. The electrical components in the distribution box are damaged; 3. The fan is burnt out of phase loss; 4. The fan works for too long and burns; 5. The fuse is blown.
 
Solution: 1. Check for short circuit or leakage; 2. Replace damaged electrical components; 3. Replace the fan; 4. Replace the fan; 5. Replace the fuse.
 
3. The fan does not stop
 
Cause of failure: The intermediate relay is damaged.
 
Solution: Replace the intermediate relay.
 
Fourth, the lighting is not bright
 
Failure reasons: 1. The fluorescent lamp is aging; 2. The rectifier is burned out.
 
Solution: 1. Replace the fluorescent lamp; 2. Check the voltage and replace the rectifier.
Previous: Nucleic acid sampling booth won the bid
Next: Nucleic acid sampling booth
Copyright@ 2003-2026   Zhejiang FUXIA Medical Technology Co.,Ltd.