Spirent Communications SmartBits 200 Performance Analysis System

4-Module SmartBits Chassis The Spirent Smartbits 200 is used to test network devices and complex network configurations, including 10/100 Mbps Ethernet, Gigabit Ethernet, ATM and Frame Relay. It can be used for measuring the performance limits of an emerging technology in a development lab to the largest enterprise network. The Spirent Communications Smartbits 2000 chassis can be configured with any combination of up to 20 single slot Smart Cards.

Two platforms are available.  The Spirent SMB-200 4-slot chassis and the Spirent SMB-2000 20-slot chassis. The Spirent Smartbits 200 is used to perform end to end testing to check for network trouble spots and weaknesses. It also can be used to test end to end performance to monitor throughput and prevent network overload. A PC workstation provides remote control through the Internet or local control via an RS-232 port. One workstation can control up to eight Smartbits stacks. – See more at: http://www.testequipmentconnection.com/39606/Spirent_SMB-200.php#sthash.vrfEbewP.dpuf

• SmartBits chassis with 20 SmartCard slots. Controllable over the Internet or from a PC equipped with SmartWindow.
  
• Includes a 19″ rackmount.
  
• Input Power: 90-264 VAC. Nominal 115 or 230 VAC, 47-63 Hz.
  
• Dimensions: 19″W x 6.75″H x 15″D (48.3W x 17.2H x38.1D cm).
  
• Weight: 27 lbs. (12 kg) fully-loaded. Shipping weight approximately 30 lbs. (13.5 kg).
  
• Operating environment: 59° to 104° F (15° to 40° C);20 to 80% relative humidity. Must have space forunimpeded airflow into the fans at the side of thechassis.
  
• Local stacks must be located within 1 meter of each other

• Accommodates a comprehensive set of powerful, technology-based SmartCards for Ethernet, ATM, and Frame Relay.
  
• Bundled with three PC-based software applications for comprehensive performance analysis (SmartWindow™, SmartLib™, and SmartApplications™).
• Supports a 10 Mbps Ethernet connection to a host PC.
  
  Provides remote control through the Internet. Can also be controlled via an RS-232 port.
  
• Provides GPSSupport. You can remotely synchronize the timing mechanism of multiple chassis by using the external GPSkit. This allows accurate measurement of one-way latency and jitter, 100-ns accuracy time stamps, and system start/stop.
  
• One workstation can control up to eightSmartBits stacks (32 chassis with a total of 640 ports) via SmartLib.
  
• Multiple users can simultaneously access the SMB-2000.
  
• Includes RJ-45 expansion-in and expansion-out jacks. Accepts external 10 MHz clocksignals.
  
• Up to 512 chassis can be synchronously connected by using SmartBits multi-chassis extension units.

• AST II™
  
• SmartApplications™
  
• SmartCableModem Test™
  
• SmartFlow™
  
• SmartLib™
• Programming Library
  
• SmartMulticastIP™
  
• SmartSignaling™
  
• SmartTCP™
  
• SmartVoIPQoS™
  
• SmartWindow™
  
• SmartxDSL™
  
• Turn Up Connect™
  
• VAST™