Leader LT-450 Multiformat Pattern Generator

Leader LT450 Features

• With the formats available on the LT 450, you can test most video displays, including television sets, PC monitors, and projectors. The LT 450 supports19 component output formats, 8 composite output formats, and 5 PC monitor formats
• The LT 450 is equipped with an HDMI connector, which is a digital interface used in household televisions and set-top boxes. It can be used to check HDCP compliant copyright protection functions and to make simple checks on the CEC and DDC functions (pass/fail results can be displayed on screen)
• Simple checks can be made simultaneously on up to seven outputs (when option units are installed)
• Analog and digital component outputs can be switched between G, B, R and Y, PB, PR signal formats
• Equipped with an S connector for Y/C separation signal output. An ID signal is superimposed on the C signal
• Equipped with a JEITA CP-4120 D5 output. Supports ID signals (lines 1, 2, and 3)
• Equipped with a mini D-sub 15-pin connector, which is an analog interface for PC monitors
• Equipped with a DVI-I connector, which is a digital interface for PC monitors. It can be used to check HDCP-compliant copyright protection functions and to make simple checks on the DDC function
• Equipped with sync signal connectors that transmit CS (trilevel or binary), HD, and VD signals. Analog audio output
• The frequency (400Hz or 1kHz) can be set and the output can be turned off separately for left and right channels
• You can make any test pattern into a simple motion picture pattern by scrolling it vertically, horizontally, or diagonally
• The video signal level and the analog sync signal level can be adjusted separately in the range of 0 to 100%
• Supports closed captions. Teletext (VBI), CGMS, and WSS will be supported in the future
• Remote control via RS232C
• The LT 450 can be remotely controlled from a PC
• Up to 100 panel settings can be stored and re-called