VG- 899-HDMI Multi-Functional Full-Color Signal Generator

VG- 899-hdmi multi-functional full-color signal generator

VG- 899-hdmi desktop 200Mhz multi-functional full-color signal generator, with the maximum resolution of 4096*4096, can output HDMI and YPrPb color difference signal. The panel button supports various operation functions and can be used for CRT, LCD, PDP, HDTV, projector and other related products testing and research and development.

Specifications and bandwidth

1. Analog: 5-200 MHZ

HDMI: 25-81mhz TV signal NTSC 3.58 PAL B/D/G/H/I/KSECAM L video output

1.VBS signal: Video signal in general A/V signal

2.Y/C signal: general color brightness separation signal (i.e., s-terminal connector)

3. The impedance matching: 75 Ω

4. Output Timing, Video Level and Sync Level all meet the system standards

5. With v-chip, Closed Captio, Teletext and other full-function output horizontal frequency of 10-130khz, the maximum 4096 dots horizontal resolution and full frequency width are all 1dot step vertical scanning number 15.6-200hz, and the maximum 4096 LinesDDC

function

1. DDC2B specifications

2. Data format in VESA"EDIE 1.3-128 bytes

3. Cooperate with the software to edit various data

4. D-sub and DVI joints can both read and write DDC's data scanning method non-interlaceinterlace & SyncInterlace & Video can support EQP, and Serration (OFF/ 0.5h /1H/XOR can be set) d-sub 15Pin

Output connector

1. Signal: R,B,G, HS, VS

2. The impedance matching: 75 Ω

5.CS signal level: 0-0.6 V6. Output control: off/R, B, G Audio

Sound output

1. Frequency range: 0 ~ 20 Khz (100Hz/Step)

2. Output level: 50 ~ 2000mV (500mv/Step)

4. SWEEP supported HDMI output interface Video output HDMI 1.0

specifications

1. Frequency width: 25~81Mhz

2. Output terminal: Type A standard

3. Chip set: SiI 9190 series

4. Support HDMI standard 1.0HDMI output interface Video output HDMI 1.0 specification

5. Support self-editing of Info Frame

6. Built EIA standard Timing chart

7. Support HDCP function

8. Color difference array color matching can input digital serial interface dvi-i by itself: standard dvi-i connector can output Analog and DVI simultaneously

The signal

1. Frequency width :(including HDCP function) 25-165mhz x1ch USES SiI 170 IC. 2

Frequency: 0~20Khz; amplitude: 0~7FFH4; sampling rate :32,44.1,48Khz

1. Sp-8848: Windows version, which can control the output of the machine and edit Timing and Pattern.

The standard equipped with digital TV interface software for the Japanese 14 D joint pin type D joint can support D1 ~ D5 specifications Video memory/color number 4 k * 4 k * 24 bits per color 16777216 full-color linear signal output and HDTV (BNC connector) 1. The signal: R, B, G, / Y, R - Y, B, Y (color difference signal) 2. The impedance matching: 75 Ω 3. Video a quasi: 0.3-1.2 V4. Setup a quasi: 0-0.25 V5. CS signal a must:Output control: off/R, B, G/Y, y-r, y-b external controlHS, VS, CS2. Impedance matching: 75 Ω 3. Signals a quasi: greater than 2 v 4. Output control: ON/OFF switch/positive and negative polarity storage equipment and capacity 1. ATA Compact Flash Card: 64 MB a PCMCIA transition for standard 2. Capacity: 850 TIMING PATTERN 850 units 850 set of test group 3. Scalable: largest power AC of up to 256 MB

Leave a message for product

Title

Contact

Tel

Content

Verify Code

Click to change

Note：1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!