[
Tektronix SD42 Optical Analyzer
]
Product Name:
Tektronix SD42 Optical Analyzer
Product Model:
SD-42
Manufacturer:
Tektronix
file:
No Related Documents
Product Description
Tektronix SD42 Optical Analyzer Tektronix SD42 Optical Analyzer
Tektronix SD42 Optical Analyzer
Features:
-
Optical to Electric Converter Head
-
DC to 6.4 GHz optical bandwidth
-
355 ps optical impulse response (FWHM) with the SD-24 and SD-26,
-
360 ps optical impulse response (FWHM) with the SD-22
-
1000 nm to 1700 nm Spectral Response
-
Mean Optical Power Monitor function
Optical-to-Electrical Converter Head Pulse Characteristics
-
Response Bandwidth: DC – 6.4 GHz
-
Wavelength Range: 1000 to 1700 nm
-
Optical Impulse Response Speed: 55 ps max Full Width Half Maximum
-
Conversion Factor: 25 mW/V
-
Conversion Gain: 40 mV/mW
-
Equivalent Display Noise: with SD-22 10 µWRMS typical
-
With SD-24/SD-26 33 µWRMS typical (unity dot response); <15 µWRMS typical (with smoothing)
-
Aberrations (Step Response): <15% peak to peak in the first 400 ps following pulse input
-
Linear Response Range: <25 mW peak power; <5 mW mean power
-
Maximum Nondestructive Input: 75 mW peak power; 10 mW mean power
Optical-to-Electrical Converter Head Power Meter Characteristics
-
Dynamic Range: 5 nW to 5 mW
-
Linear Response Range: Range 1: <5 µW mean, <25 mW peak; Range 2: <5 mW mean, <25 mW peak
-
Sensitivity: Range 1: 1 V/mW; Range 2: 1 V/µW
Environmental and Mechanical Characteristics
-
Weight: 205 g (0.45 lb)
-
Height: 71 mm (2.9 inches)
-
Width: 23 mm (0.95 inch)
-
Depth: 95 mm (3.9 inches)
-
Ambient Temperature: Operating: 0° C to 50° C (32° F to 122° F); Nonoperating: –55° C to +75° C (–67° F to +167° F)
-
Altitude: Operating: to 4.5 km (15,000 ft.); Nonoperating: to 15 km (50,000 ft.)
-
Humidity: to 95% relative humidity at up to 50° C (122° F)
-
Electromagnetic Compatibility: Meets FCC Part 15J Class B
The SD-42 Optical-to-Electrical Converter Head is a high-performance optical head for use in the 11800 Series Digital Sampling Oscilloscopes (including the SM-11 Multi-channel Unit) and the CSA 803 Communications Signal Analyzer. The SD-42 Optical-to-Electrical Converter Head is used with SD-22, SD-24, and SD-26 Sampling Heads. The SD-42 converts an optical signal into an electrical signal which serves as the input to an SD Series Sampling Head.
The SD42 Optical-to-electrical Converter head can be used to analyze optical signals in the 1000 nm to 1700 nm wavelength range. The pulse response of the measurement system is less than 55 ps FWHM (Full-width, Half-maximum), which is equivalent to a calculated bandwidth of DC to 6.4 GHz. The electrical output on the front panel is coupled to the adjacent sampling head via the semi-rigid coaxial link provided.
Leave a message for product
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报