The Veripac series of PTI in the United States can be simply integrated into the packaging process to improve product quality, reduce waste and provide operators with a clear understanding of packaging quality. The whole testing process is non-destructive, non-intrusive and requires no preparation of samples. The testing device is designed to detect soft, hard and semi-hard packaging. It can be tested at any step or multiple times for the same sample. After testing, good packaging can be re-placed into the packaging line without any damage. Veripac testing method provides a more reliable, economical and efficient packaging testing solution. It solves the problem that different processors produce misleading results for different products.
PTI VeriPac D series is a non-destructive leak detection system specially designed for soft bag packaging. VeriPac inspection system provides qualitative results (pass or fail), as well as relevant quantitative data, leakage rate and leakage size. In order to meet the requirements of different packaging specifications and detection sensitivity, VeriPac D series provides several leak test instruments and different size of test chamber capacity. The VeriPac D series adopts the non-destructive vacuum attenuation leak test method (F2338) approved by ASTM as the consensus standard for packaging integrity test. It is a practical alternative to destructive test. Compared with destructive test, such as flume test, the return on investment is faster. At the same time, the key defects affecting product quality and shelf life are solved.
VeriPac410 uses vacuum attenuation technology and differential pressure measurement to detect packaging. Multiple packages can be carried out in the same test cycle, and VeriPac410 can also identify leaky packages or cavities. The test results are quantitative and can provide quantified results for operators. Pass/fail eliminates the subjectivity of human beings and avoids the current test methods which can destroy packaging. The sealing quality of packaging is achieved by accurate sorting and reliable non-destructive testing method, which eliminates the subjectivity of the testing process and reduces waste. VeriPac410 allows the tested product to return to the production line, thus eliminating waste caused by the use of destructive testing methods and saving a lot of costs.