Contact Us
Browse by Category
Hand-held vector network analyzer
To meet the requirements of site installation and maintenance, our company has developed MS202XC/3xc and MS202xB office/3xb VNA main handheld vector network carbon and sulfur analyzer (Figure 1).
This new instrument provides a RF/microwave engineer system for maintenance and interference in different areas, finding several essential primary roles.
The highest bandwidth and frequency range of handheld VNA in the high-end MS202xC/3xc series are from 5 KHZ to 20 GHZ.
The instrument has a comprehensive competition and desktop VNA performance, which usually exists in the role of other tools, such as scalar carbon and sulfur analyzer, vector voltmeter, power meter and a spectrum carbon and sulfur analyzer.
Electronic balance
The main and powerful technology of VNA can ensure the accuracy and accuracy of S parameter measurement of cable, antenna and filter.
MS20xC/3xc provides a true 2-port VNA that can measure all S parameters at the same time.
The twelve error correction algorithms can make the measurement of MS202/3 S-performance parameters more accurate than the scalar measurement results of 10 times XC series.
True (2 - port structure high-speed serial device (fig. 2) distinguishable features of carbon and sulfur analyzer.
3 MS202/xc series supports waveguide measurement.
Is the scanning speed 350?
S/pt, real-time display when adjusting filter.
The dynamic range greater than 95 dB is used for filtration, and the time domain carbon and sulfur analyzer with enhancement function can satisfy the TDR determination of substances and effects.
Problems in fault location of DTF carbon-sulfur analyzer with time-domain gate isolation/localization make VNA owners isolate/locate the long roundtrip cables better.
Vector Network Carbon and Sulphur Analyser, Spectrum Carbon and Sulphur Analyser
In addition to the Vector Network Carbon and Sulphur Analyser for Functions, Master MS203xC VNA also provides the usual desktop spectrometer function instrument.
Frequency ranges from 9 kHz to 20 GHZ 9 GHZ and two models, which can detect small signals and interference sources between them.
Using standard preamplifiers, the average noise display sensitivity of typical values is 160 DBM at 1 Hz resolution bandwidth (RBW).
RBW is greater than 104 dB in the dynamic range of 1 Hz.
Phase noise of 1 GHZ - 100 DBC/Hz, 10 KHZ deviation, so technicians can use MS203xC to detect and capture interference signals.
MS202xB/3 XB VNA owners have a strong price/performance ratio to provide value for users working or less than 6 GHZ.
An instrument combines a variety of functions, including the Sun Visible TFT LCD Resistance Touch Screen, enabling operators to wear gloves to operate the instrument.
Two series can be used on site.
They all have strong shells and can withstand a wide range of temperatures, ranging from - 10 to 55 degrees Celsius.
In less than five minutes of preheating time, batteries can be replaced on site. VNA works for three hours without charging.