Multi-polar tubular trolley line
If you are interested in this product,
you can
Product Name:
Multi-polar tubular trolley line
Product Model:
HXTS HXTL series
Supplier Name:
other brand
Brief Introduction
Multi-polar tubular trolley line
HXTS HXTL series multistage the tube trolley line specifications and the basic parameters of the table
Multi-polar tubular trolley line
introduction
Multi-polar tubular trolley line
HXTS HXTL series multistage the tube trolley line specifications and the basic parameters of the table
|
型号
|
导轨截面
|
导管35℃时*大连继载流量（A）
|
极数
|
可分别
使用极数
|
配用导电器
|
使用起重机
吨位
|
|
型号
|
配用数量
|
|
HXTS-4-10/50
|
10
|
50
|
4
|
3.4.5.6.7.16
|
JD-4-10/25
|
2
|
1-3'
|
|
HXTS-4-16/80
|
16
|
80
|
4
|
3.4.5.6.7.
|
JD-4-16/40
|
2
|
3-5'
|
|
HXTS-4-25/120
|
25
|
120
|
4
|
3.4.5.6.7.
|
JD-4-25/60
|
2
|
5-10'
|
|
HXTS-4-35/140
|
35
|
140
|
4
|
3.4.5.6.7.
|
JD-4-35/70
|
2
|
5-10'
|
|
HXTS-4-50/170
|
50
|
170
|
4
|
3.4.5.6.7.
|
JD-4-50/80
|
2
|
10-30'
|
|
HXTS-4-70/210
|
70
|
210
|
4
|
3.4.5.6.7.
|
JD-4-70/120
|
2
|
30-50'
|
|
HXTS-4-80/230
|
80
|
230
|
4
|
3.4.5.6.7.
|
JD-4-80/120
|
2
|
30-50'
|
|
HXTS-3-95/300
|
95
|
300
|
3
|
3
|
JD-6-50/90
|
2
|
50-100'
|
|
HXTS-3-140/400
|
140
|
400
|
3
|
3
|
JD-6-70/120
|
2
|
100'
|
|
HXTS-3-150/420
|
150
|
420
|
3
|
3
|
JD-6-70/120
|
2
|
100'
|
|
HXTS-16-10/50
|
10
|
50
|
16
|
8.10.12.14.16
|
JD-16-10/25
|
按需
|
|
|
注：滑触线标准长度4m，6m 输电导轨参数：符合GB3048电线电缆导体标准要求。 HXTL型参数与HXTS相同。
|
I-steel cable pulley
Form of a conductive the HC type cable pulley series for the crane trolley powered. It has to go round bracket, pallet, the flexible cable fixed on the pallet, the traction frame sync cable pulley in order to achieve the purpose of car powered.
HC cable pulley series is divided into in load and re-load and light load type, therefore tackles walking round three o80, o63, o50. Carrying capacity of <50 to 150kg, each type of pallet layers divided into single, double, triple, three forms in each category. The first end of the tractor cable terminals for fixed hanging line frame, the middle of the cable pulley
Explain
Fixed hanging bobbin installed, should be followed by hanging an iron block.
2, adjust traction head, and trolley traction holes do not touch the upper and lower edges of the entire trip.
3, 8 m cable length for the crane span 1.2 doubly.
4, adjust the traction wire rope, cable length so that the length is less than the same section, the force run by the traction wire rope.
5, when the cable diameter ranging between cable clamp pad soft rubber, so the outside diameter is basically the same, in order to clamp the cable.
6, cloth cable, you should consider both sides of the cable pallet force balance.
7, when the cable pulley for the story, three requirements are different.
8 dual gasket, pulley device to adjust the washer, when the rail is not timely, the washer on the inside of the fixed plate to adjust the width of the gauge the factory rail 1160x88x6 system according.
Leave a message for product