Switch life tester is designed according to the relevant standard requirements of GB16915, GB15092.1. IEC61058 and UL and can be used for a variety of wall switches, plate switches, pull switches the key-press switches and the zither press for the mechanical life test, test series with the SH9403/9404 series load containers, so it can achieve the live power life test of the switch, normal operation and breaking capacity test.
l Switch life tester is designed according to the relevant standard requirements of GB16915, GB15092.1. IEC61058 and UL and can be used for a variety of wall switches, plate switches, pull switches the key-press switches and the zither press for the mechanical life test, test series with the SH9403/9404 series load containers, so it can achieve the live power life test of the switch, normal operation and breaking capacity test.
Technical characteristics
l Power supply: AC 220V ±10%, 50Hz；
l The working method: Electrical or pneumatic
l The equipment gas source: 4-6kg/cm2（Just for pneumatic)
l The put through time: can preset from 0.2 to 99.9s. （Just for pneumatic）
l Experimental cycle time: can preset from 0 to 99.9s. （Just for pneumatic）
l The test rate: can preset from 15 to 30 bmp. （Just for pneumatic）
l Counter: can preset from 0 to 999999. The time calculate method: According to the on and off of the current or mechanical movements counting
l Test station: Have two stations (can choose the station number)
l Intelligent distinguish function: When the switch bonding, appearance to continually put through or to cut off, it can give an alarm when it reach the set time.
l Thrust test functions: Can test and show the force value which exert on the switch, range: 0~5N ± 0.01N (This function is the elect item, so it should specify in the order.)
l The switch distance test function: Can measurable the distance of the switch, the range is 0 to 15mm, and the accuracy is 0.001mm (This function is the elect item, so it should specify in the order.)
l Appearance size: 450×400×300mm