Cable burning tester used to test the wire and cable under the overheating and other unnormal conditions, the flame retardancy function of the insulation layer.
Overview:
Cable burning tester used to test the wire and cable under the overheating and other unnormal conditions, the flame retardancy function of the insulation layer.
Characteristics:
The tester is composed by the test part and control part, using the integrated design, to facilitate the installation at the scene and debug. The shell of the test chamber and the important components are all manufactured by stainless steel, resistant cigarettes and gas corrosion; The automatic degree of control system is high, has automatic ignition function, temperature and time figures show, so that the observation and records are facilitate and the use of it is stable and reliable.
Power supply
AC220V±10%/50Hz。(Other power specifications can be customized).
|
Model
|
According to the standard
|
Average volume
|
Appearance size (mm) width x depth x height
|
Weight
|
Technical requirement
|
Configuration
|
|
SH5501
|
GB12666
|
0.16
|
55 (width) x 450 (depth) x 1380 (height)
|
30
|
Use the gas or liquefied petroleum gas as the source gas of the pilot flame (Under the conditions of the proposed, suggest the elect of temperament better gas ),the inner diameter of the burner is￠9.5±0.5mm, 100mm long, has the air-conditioned hole. The height of the flame is moderate, according to standards can be transferred from 20mm to 175mm. The imposing time and holding time of the flame can be adjusted in the scope of 0~99 minutes and 99 seconds. The process of the test is automatic control.
|
Without the temperature and time device (automatic ignition)
|
|
SH5502
|
The relevant standard of GB18380.1-2002 and IEC
|
0.16
|
45
|
Use the gas or liquefied petroleum gas as the source gas of the pilot flame (Under the conditions of the proposed, suggest the elect of temperament better gas ),The type of the burner is the pre-mixed one, and the inner diameter of it is￠12±0.5mm, 100mm long. The height of the flame is moderate, according to standards can be transferred from 20mm to 175mm. The imposing time and holding time of the flame can be adjusted in the scope of 0 to 99 minutes and 99 seconds. The process of the test is automatic control.
|
With double- flowmeter and Pressure Regulator(automatic ignition)
|
|
SH5502/T
|
The relevant standard of GB18380.1-2002 and IEC
|
0.16
|
50
|
With double- flowmeter and pressure regulator, with temperature and time measurement device(automatic ignition)
|
|
SH5504
|
|
0.07
|
55(width)x390(depth)x820 (height)
（305×356×610）(The inner size 305×356×610)
|
30
|
use the gas or liquefied petroleum gas as the source gas of the pilot flame (Under the conditions of the proposed, suggest the elect of temperament better gas ),the inner diameter of the burner is￠12±0.5mm, 100mm long, has the air-conditioned hole. The height of the flame is moderate, according to standards can be transferred from 20mm to 175mm. The imposing time and holding time of the flame can be adjusted in the scope of 0 to 99 minutes and 99 seconds. The process of the test is automatic control.
|
|
|
SH5505
|
UL1581 and UL224(The level of vertical burning)
|
0.07
|
|
SH5510
|
The requirement of MT386-95
|
|
The inner diameter of the burner is￠9.5±0.5mm, 102mm long, has the air-conditioned hole.
|
